power inductors C xpl2010 series document 646-1 document 646-1 revised 06/15/12 inductance 2 dcr (ohms) 3 srf typ 4 isat (a) 5 irms (a) 6 part number 1 20% (h) nom max (mhz) 10% drop 20% drop 30% drop 20c rise 40c rise xpl2010-201ml_ 0.20 0.024 0.027 408 2.80 3.45 3.75 2.2 2.8 xpl2010-331ml_ 0.33 0.031 0.035 309 1.90 2.75 3.05 1.9 2.6 xpl2010-501ml_ 0.50 0.040 0.045 218 1.80 2.35 2.64 1.7 2.3 xpl2010-681ml_ 0.68 0.057 0.063 152 1.55 1.95 2.19 1.5 2.1 xpl2010-821ml_ 0.82 0.068 0.075 132 1.25 1.65 1.90 1.3 1.7 xpl2010-102ml_ 1.0 0.081 0.089 117 1.20 1.60 1.80 1.1 1.6 xpl2010-152ml_ 1.5 0.105 0.116 80 0.950 1.30 1.50 1.0 1.4 xpl2010-222ml_ 2.2 0.156 0.173 75 0.940 1.20 1.35 0.96 1.3 xpl2010-332ml_ 3.3 0.207 0.228 55 0.700 0.925 1.05 0.79 1.1 xpl2010-472ml_ 4.7 0.336 0.370 40 0.580 0.750 0.845 0.74 1.0 xpl2010-682ml_ 6.8 0.421 0.463 33 0.450 0.620 0.725 0.64 0.87 xpl2010-822ml_ 8.2 0.457 0.503 30 0.440 0.600 0.670 0.55 0.75 xpl2010-103ml_ 10 0.555 0.611 28 0.390 0.525 0.610 0.49 0.66 xpl2010-183ml_ 18 1.47 1.60 31 0.500 0.560 0.590 0.32 0.43 xpl2010-223ml_ 22 1.89 2.00 25 0.410 0.470 0.510 0.28 0.39 xpl2010-333ml_ 33 2.59 2.85 20 0.330 0.380 0.410 0.23 0.31 xpl2010-473ml_ 47 3.96 4.25 17 0.270 0.300 0.320 0.18 0.25 xpl2010-563ml_ 56 4.48 4.82 15 0.240 0.280 0.300 0.17 0.24 xpl2010-683ml_ 68 6.14 6.56 13 0.210 0.250 0.280 0.15 0.20 xpl2010-823ml_ 82 6.45 6.90 12 0.200 0.240 0.260 0.15 0.20 xpl2010-104ml_ 100 8.48 9.27 11 0.180 0.214 0.232 0.13 0.17 xpl2010-224ml_ 220 19.2 21.1 7.1 0.122 0.143 0.161 0.086 0.116 designers kit c428 contains 5 each of all values core material composite core and winding loss see www.coilcraft.com/coreloss weight 20 mg environmental rohs compliant, halogen free terminations rohs compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. other terminations available at additional cost. ambient temperature C40c to +85c with i rms current, +85c to +125c with derated current storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 2000/7 reel; 7500/13 reel plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.19 mm pocket depth pcb washing only pure water or alcohol recommended ? utra-miniature, magnetically shielded power inductors ? very low dcr and excellent current handling. ? soft saturation makes them ideal for vrm/vrd applications. 1. when ordering, please specify termination and packaging codes: xpl2010-103mlc termination: l = rohs compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver. special order: s = non-rohs tin-lead (63/37). packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape (2000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (7500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 4395a or equivalent. 5. dc current at which the inductance drops the specifed amount from its value without current. 6. current that causes the specifed temperature rise from 25c ambient. 7. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2012 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check out web site for latest infor mation.
smt power inductors C xpl2010 series document 646-2 document 646-2 revised 06/15/12 typical l vs current typical l vs frequency dimensions are in inches mm 0.079 0.008 2,0 0,2 0.069 1,75 0.075 0.008 1,9 0,2 0.039 1,00 max 0.057 1,45 0.087 2,2 0.041 1,04 0.014 0,35 0.030 0,75 min max max r ecommended land p attern typical irms derating -40 -20 02 04 06 08 0 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 25c pe r cent of rated rms i 0.1 1 100 10 frequency (mhz) inductance (h) 0.1 1 10 1000 100 0.33 h 1.0 h 3.3 h 33 h 10 h 100 h 220 h 0.1 1 10 1000 100 0.01 0.1 10 1 current (a) inductance (h) 0.33 h 1.0 h 3.3 h 33 h 10 h 100 h 220 h us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2012 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check out web site for latest infor mation.
|
